External wood basecoat, for grainy and brittle wooden surfaces. It masks inhomogeneity and restores a clear and luminous color. Sealing and consolidating, it prepares the surface for finishing, usually withHolzwachs lasur 3in1.

Ideal for protection and wood colouration
Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties.
It colours the wood, enhancing the grain.
It contains UV filters and antiseptic additives that provide effective protection against fungi and insects.
Colours are light resistant and have good resistance to atmospheric agents.
Recommendations for application:
Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.

ECOSEAL 500 is a one-component, elastoplastic sealing putty based on acrylic aqueous dispersion, which is designed for joints between construction parts exposed to medium stress. It is ready to use and effectively seals joints inside and outside, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood. Good mold resistance.

FIELDS OF APPLICATION
Inside and outside joints, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood.

Maintenance oil for windows, shutters and doors in lacquered or oiled wood. Restores shine and extends the life of the finish. Easy use.

A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors.
Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood.
Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application:
The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base.
The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.

Colorless, non-peeling waterbased finish for wood, based on high-flexibility resins for the protection and decoration of wood. Suitable for wooden houses, windows, pergolas, ceilings, paneling, ... Yield: 8 - 12 m2 / Lt Operating temperature: + 5° C / + 30° C Use: Indoor / Outdoor With UV filters. The precious substances that compose it combined with UV filters, prevent the formation of chromofore molds and prevent the attack of lignivorous insects, guaranteeing an excellent resistance to atmospheric agents. Its natural density facilitates brush application. It does not contain Lindane and PCP

Ready-to-use consolidant with low viscosity and rapid drying. Gives new strength to the wood that is weakened by moisture or weakened by woodworms. It is normally applied before putty. Suitable for restoring damaged parts of furniture and fixtures.

Designed to protect wooden structures before final painting as a surface barrier. A waterbased, odourless and quick-drying Primer formulated to protect newly built, wooden structures while waiting for the subsequent finishes. It provides effective protection against mildew, fungi formation and insect infestation, even in the absence of other treatments. It does not change the colour of the wood and allows the subsequent application of any finish. Recommendations for application:
The product can be used as a pre-treatment before exterior woodstain products, lacquers or finishes in general.BR> Thanks to the high content of active ingredients, it is recommended for waterbased finishing cycles to guarantee greater protection and prolong the duration of the coating. For Exterior use.

Applied annually, it effectively extends the life of exterior finishes, giving new strength and shine to worn paints. Odorless, excellent distension, very easy to use. It can be applied indifferently on water and solvent based finishes.
FIELDS OF APPLICATION
Ideal for wooden window frames, but also suitable for PVC and aluminum profiles.

Extra strong gel paint remover based on a special mixture of solvents for use on wooden surfaces. Produced with the latest generation of pure solvents, it is not corrosive but highly effective. Free from methylene chloride, and therefore free from any commercial restrictions, applied on wood does not alter its natural colour. For professional use.